Skip Navigation

Blog

What Size Generator Do I Need for My House in Central Oregon?

November 18, 2026

The generator size you need depends on what you want to keep running when the power goes out. A refrigerator and a few lights use less electricity than a heating system or well pump. You'll need to account for running power and startup demand. A sizing chart helps you plan, but a professional assessment determines the right equipment.

Start With Essential Loads or Broader Home Coverage

Think about what you'd need during a winter power outage in Bend or Sisters. Keeping food cold, running a few lights, charging phones, and powering your heating equipment might be enough.

If you want your entire house running, the list gets longer. Electric furnaces, heat pumps, water heaters, and large appliances use considerable power.

Our article on types of home generators explains the differences between portable and standby equipment.

Generator Sizing Chart for Common Household Loads

Your appliances don't all use the same amount of electricity. This chart gives you a starting point for making your list.

Equipment Running Watts Extra Startup Watts
Refrigerator 192 1,008
Three 60W lights 180 0
Laptop computer 200 0
Furnace blower, ¼ HP 600 400
Sump pump, ⅓ HP 800 500
Well pump, ½ HP 1,000 2,100

These are illustrative planning figures, not verified ratings for specific appliances. Check manufacturer specifications and equipment labels for actual running and starting requirements.

Why Running Watts and Starting Watts Differ

Your refrigerator uses electricity while its compressor runs, but starting that motor takes a brief burst of extra power.

Running watts tell you what equipment needs during operation. Starting watts account for that extra demand.

Generator capacity is measured in watts or kilowatts (kW). One kilowatt equals 1,000 watts. Your generator needs enough continuous power for running equipment and enough short-term capacity for startup.

How to Estimate Your Generator Needs

You can put together a useful estimate before meeting with an electrician.

  1. Make your list. Write down everything you want powered during an outage.
  2. Check equipment ratings. Find running and starting requirements in appliance manuals or on accessible labels.
  3. Add running watts. Total the equipment you expect to operate together.
  4. Account for startup. Add the largest extra startup demand, assuming motors start separately.
  5. Have Roth review it. We'll check your actual loads and equipment requirements.

For example, say your selected appliances total 2,000 running watts. One pump uses 800 of those watts but needs 2,000 total when starting.

Its extra startup demand is 1,200 watts.

Your simplified peak is 2,000 + 1,200 = 3,200 watts.

That isn't a generator recommendation. Other equipment starting together and installation conditions affect the final size.

Central Oregon Factors That Can Change the Recommendation

A generator installed in Bend or Sisters needs to perform at your property's elevation. Higher elevations can reduce its power output, so we'll check the manufacturer's ratings for your location.

We'll also look at what you'll need during a winter outage. A gas furnace blower uses much less electricity than an electric furnace, while a heat pump has its own power requirements. Knowing how your heating system works helps us determine what your generator needs to run.

If you have a well, we'll account for the extra electricity its pump needs when starting. For vacation homes, we'll discuss which equipment needs to stay powered while you're away.

Roth provides Central Oregon home services for heating and electrical equipment, so we can review those needs together when planning your backup power.

Can Load Management Reduce the Capacity Needed?

You don't have to run every large appliance at once.

Some standby systems use load management to delay equipment until enough power is available. For example, your generator could prioritize heating and refrigeration instead of running the electric water heater at the same time.

That approach can reduce the capacity needed, but you'll have limits on what runs together.

What Roth Reviews Before Recommending a Generator

Bring your equipment list when we meet. We'll review what needs power, how much electricity it uses, and how your home is set up.

We'll check your electrical panel capacity, transfer equipment, available fuel, and generator location. Elevation and cold-weather requirements also affect equipment selection.

With professional whole-home generator sizing, we'll compare equipment that supports your priorities and explain the installation work involved.

We'll discuss generator maintenance so you know what regular care involves once your system is installed.

Roth's technicians can help you plan a generator for your Central Oregon home. Bring your essential load list, and we'll work through the equipment and installation requirements together.

Schedule Online(503) 673-6394

What Size Generator Do I Need for My House in Central Oregon?

Frequently Asked Questions

Square footage doesn't determine generator size. Your heating equipment, appliances, startup loads, and desired coverage determine the capacity.

Yes, with suitable capacity and electrical connections. Electric resistance heating and heat pumps have different power requirements.

No. A larger generator can cost more to purchase and operate. Proper sizing considers your actual electrical needs.

Yes. Generator performance changes with elevation. We'll review manufacturer ratings for your property's location.

Share This Article
cross